General Remarks; Introduction; Notes On Copyrights - Kemper MaxiFil Mode D'emploi

1 General Remarks

1.1 Introduction

These operating instructions are an essential aid for the correct and
safe operation of the KEMPER MaxiFil welding fume filter unit, hereinafter referred
to as the MaxiFil.
The operating instructions contain important information for operating the MaxiFil
safely, properly and efficiently. Following the instructions helps to avoid danger,
reduce repair costs and downtime and to increase the MaxiFil's reliability and service
life. The operating instructions must always be available and should be read and
applied by every person who is charged with working on or with the MaxiFil.
These jobs include, among other things:
− operating and fault clearance in everyday use
− maintenance (care, servicing, repair)
− transport
− assembly.

1.2 Notes on Copyrights

These operating instructions should be kept confidential. They should be made
accessible only to authorized persons. They may be passed on to third parties only
with the written consent of KEMPER GmbH.
All documents are protected under the Copyright Act. The reproduction and
distribution of documents, including excerpts, as well as re-using and passing on
their contents is not permitted unless this is expressly permitted in writing.
Violations are liable to prosecution and liable for damages. All rights to the exercise
of intellectual property are reserved for KEMPER GmbH.
Art.-Nr.: 150 2489
Technical changes and errors excepted.
KEMPER MaxiFil Operating Instructions - EN
- 37 - Rev.: 01
Latest update: 06/2015