Distinguishing Features Of The Device Variants - Kemper MaxiFil Mode D'emploi

3.1 Distinguishing features of the device variants

MaxiFil is produced in two versions.
• MaxiFil IFA
• MaxiFil
The MaxiFil device standard variant has been tested by IFA.
This means that the MaxiFil device complies with the requirements specified by IFA
(Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung - Institute
for Occupational Safety of German Legal Accident Insurance) and fulfils these testing
regulations.
For simplification, this is indicated with an IFA logo with cautions in this instruction
manual.
The IFA logo with cautions draws the reader's atention to important notifications and
information with respect to the MaxiFil IFA device.
Device identification
MaxiFil IFA
MaxiFil
MaxiFil IFA is marked on the device body with DGUV-Test symbol and W3
identification (welding fume class identification) in a form of a label.
The location of this label is described in 3.4. (Markings and labels on the MaxiFil
device)
Art.-Nr.: 150 2489
Technical changes and errors excepted.
KEMPER MaxiFil Operating Instructions - EN
Meaning / explanation
The controlled design complies with
IFA requirements and testing
regulations.
- 44 -
Logo with cautions
Rev.: 01
Latest update: 06/2015