Kemper MaxiFil Mode D'emploi page 66

- Changing the intake filter:
• Have a plastic bag/rubbish bag ready.
• Switch the MaxiFil off at the On/Off button (Fig. 3, No. 1).
• Prevent unintentional restarting by unplugging the device.
• Pull the intake filter (Fig. 6, No. 15) forwards out of the intake filter holder (Fig.
6, No. 16) and put it in the rubbish bag.
• In doing so, make sure to stir up as little dust as possible.
• Replace the filter cartridge with a new one.
• Plug the power cable back into the socket and turn on the device. The green
power indicator light on the On/Off button should come on and show the
device is running normally.
Art.-Nr.: 150 2489
Technical changes and errors excepted.
KEMPER MaxiFil Operating Instructions - EN
Figure 6, Changing the intake filter
- 62 - Rev.: 01
Latest update: 06/2015