Assembling The Exhaust Arm - Kemper MaxiFil Mode D'emploi

Figure 2, Unpacking and assembling the wheels
No. Designation
3 Handle bar
4 Filter element
11 Filter change system
13 Rear wheel
14 Swivel castor with brake (front wheel)

5.2 Assembling the Exhaust Arm

The exhaust arm consists of three main components: slew ring, support frame and
extraction hood. These are individually packaged in one carton each.
There is a separate guide for installing and adjusting the exhaust arm in the box
containing the support frame. Follow these instructions for mounting the exhaust arm
on a mobile device.
Art.-Nr.: 150 2489
Technical changes and errors excepted.
KEMPER MaxiFil Operating Instructions - EN
- 51 - Rev.: 01
Latest update: 06/2015