SOUNDMASTER DAB80 Manuel D'instructions page 13

Recall preset station
is the same as in DAB mode.
Information (Info)
When the radio station is playing, press the "Info | Menu" button repeatedly to cycle through the
information broadcasted by the radio as follow:
➢ Radio Text
➢ PTY (program Type)
➢ Name
FM Menu
1. Press and hold the "Info | Menu" button until the display show "FM <Scan setting>.
2. Select with the "
•
Scan setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations. To change the scan settings to stop only at stations with
good signal strength, select "Strong station only".
•
System
Find the system settings.
If you are using a Bluetooth audio device, make sure the working distance is within 10 meters.
Different environment may have effect on the working distance.
1. Select the mode "Bluetooth" ("Bluetooth pairing" is shown in the display).
2. Activate the Bluetooth function on your Bluetooth device and select "DAB80". When the
connection was successful the display show "Bluetooth Connected".
3. Press the " " button to start or pause the playback.
4. Press the "
This unit contains also a hands-free function. This function is only available in Bluetooth
If you have connected a mobile phone by Bluetooth and you get a call, press the "Enter" button
to pick-up the call.
To hang-up the call, press long the "Enter" button.
To reject the call, press and hold the "Enter" button during ringing.
1. Select the mode "Aux" ("AUX IN" is shown in the display).
2. Connect your external device with an Aux cable with Aux jack at the backside of the unit
(Therefore you have to open the phone compartment door).
3. Start the playback on your external device.
/ " button the following settings:
/ " to skip to the previous or next track.
Mains Power/Battery
➢
Time
➢
Date
➢
®
BLUETOOTH
AUX
4
DAB80 / English Instruction Manual
®
mode.