Local Operation - Endress+Hauser RIA452 Mode D'emploi

Process Display
Range
Input current above
lower error limit and
below lower
limitations of
validity
Input current in valid
range
Input current below
upper error limit and
above upper
limitations of
validity
Input current above
upper error limit
Relay display
No power to relay: no display
Power to relay:
Digital input status display
Digital input configured:
Signal at digital input:
Information on troubleshooting can be found in Sections 9.1 and 9.2 of the Operating
Instructions.
5.3

Local operation

Operating menu activated by pressing the jog/shuttle dial for 3 seconds at least.
Display
Display " " Normal limit value
behavior
Display scaled Normal limit value
measured value behavior
Display " " Normal limit value
behavior
Display " " Fault condition
(symbol lit)
(green)
(yellow)
Relay Analog output
Normal behavior
with max. 10%
overrange. No
output < 0 mA/0 V
possible
Normal behavior
with max. 10%
overrange. No
output < 0 mA/0 V
possible
Normal behavior
with max. 10%
overrange. No
output < 0 mA
possible.
Set failsafe mode
Operation and commissioning
Integration
Normal behavior
(negative
integration not
possible)
Normal behavior
(negative
integration not
possible)
Normal behavior
(negative
integration not
possible)
No integration
35