General Safety Rules - Bosch GSL 2 Consignes De Fonctionnement/Sécurité

Read all instructions. Failure to
WARNING
!
follow all instructions listed below may
result in hazardous radiation exposure, electric shock,
fire and/or serious injury. The term "tool" in all of the
warnings listed below refers to your mains-operated
(corded) tool or battery-operated (cordless) tool.
The following labels are on your laser tool for
your convenience and safety. They indicate where
the laser light is emitted by the tool. ALWAYS BE
AWARE of their location when using the tool.
DO NOT direct the laser beam at
persons or animals and do not stare
into the laser beam yourself. This tool produces laser class 2 laser
radiation and complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007. This can
lead to persons being blinded.
DO NOT remove or deface any warning or caution labels. Removing labels increases
the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures other than those
specified in this manual, may result in hazardous radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of
the dangers of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the
laser beam intentionally or unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious
injury to the user could result if the laser tool falls.
ALWAYS use only the accessories that are recommended by the manufacturer of
your laser tool. Use of accessories that have been designed for use with other laser
tools could result in serious injury or unsatisfactory performance.
DO NOT use this laser tool for any purpose other than those outlined in this
manual. This could result in serious injury or unsatisfactory performance.
DO NOT leave the laser tool "ON" unattended in any operating mode.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Do
not modify the product in any way. Modifying the laser tool may result in hazardous
laser radiation exposure.
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
DO NOT operate the laser tool around
children or allow children to operate the
laser tool. Serious eye injury could result.
DO NOT use tools, attachments and
accessories outdoors when lightening
conditions are present.
DO NOT operate the tool in explosive
environments, such as in the presence
of flammable liquids, gases or dusts.
Sparks can be created in the tool which
may ignite the dust or fumes.

General Safety Rules

Batteries can explode or leak, cause
injury or fire. To reduce this risk, always
follow all instructions and warnings on
the battery label and package.
Remove the batteries from the tool
when not using it for extended periods.
When storing for extended periods, the
batteries can corrode and discharge
themselves.
-5-
Electrical safety
SAVE THESE INSTRUCTIONS.