English; Safety Instructions - Bosch UniversalInspect Notice Originale

Caméra d'inspection
Masquer les pouces Voir aussi pour UniversalInspect:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26

English

Safety instructions

All instructions must be read and observed. The safeguards in-
tegrated into the inspection camera may be compromised if the
inspection camera is not used in accordance with these instruc-
tions. STORE THESE INSTRUCTIONS IN A SAFE PLACE.
Have the inspection camera repaired only by a qualified repair person and only
u
using identical replacement parts. This will ensure that the safety of the inspection
camera is maintained.
Do not operate the inspection camera in explosive atmospheres, such as in the
u
presence of flammable liquids, gases or dusts. Sparks can be created in the inspec-
tion camera which may ignite the dust or fumes.
Remove the batteries from the inspection camera when not using it for longer
u
periods. The batteries can corrode and self-discharge during prolonged storage.
Do not direct the light beam at persons or animals and do not stare into the light
u
beam yourself (even from a distance).
Check the work area before using the inspection camera. No part of the inspec-
u
tion camera may come into contact with electrical cables, moving parts or chem-
ical substances. Interrupt the electric circuit of electrical cables running through
the work area. These measures reduce the risk of explosions, electric shock and
damage to property.
Wear appropriate personal protective equipment like protective goggles, pro-
u
tective gloves or a protective mask, if there are substances harmful to health in
the work area. Sewers or similar areas can contain solid, liquid or gaseous sub-
stances that are poisonous, infectious, corrosive or otherwise harmful to health.
Pay particular attention to cleanliness if you work in areas with substances
u
harmful to health. Do not eat during work. Avoid contact with substances harmful
to health, and clean hands and other body parts that could have come into contact
with them with hot soapy water after work. This reduces the danger to health.
Do not stand in water if you are using the inspection camera. Working in water
u
poses a risk of electric shock.
Bosch Power Tools
English | 17
1 609 92A 69V | (26.01.2021)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3 603 f87 000

Table des Matières