Zivan MG 9 Manuel D'utilisation page 5

MG 9/18/27/36 Battery Charger
For charger handling please use the four provided lifting lugs
SAFETY
Before lifting check the chargers lugs integrity.
ALWAYS STAY CLEAR OF THE LOAD.
Avoid any interference mean between the load and
the wire rope slings.
Lift the load 2 to 3 inches (50 to 75 mm) and then jar
the load to insure that adequate charger stability.
Lift and move the load smoothly, avoid jarring and
swinging the load while it is in transit.
KEEP THE LOAD LEVEL. Never let the load come in
contact with any obstructions.
Guide the charger by pushing or pulling the edges.
This keeps your entire body clear of the load at all
times. DO NOT guide the load by pushing or pulling
thehook. NEVER get in a position where you
could get hit with load if it dropped
PE
L1 L2 L3
MG 9 input cord connection(maximum screwing torque is 0.8Nm)
5
D02014-02