Normal Operating Mode; Display And Functions - Abus Rwm150 Manuel Utilisateur

Installation and operation
Setting up
• As soon as the smoke alarm is fixed to the mounting socket, the battery connec-
tions will automatically link and the unit will be powered up and ready to use.
• Whenever the smoke alarm is detached from the mounting socket, the battery
power will automatically be switched off in order to prevent unwanted sounding
of the alarm.

Normal operating mode

The red LED light under the cover will flash approx. every 6 minutes in normal
operating mode signalling that the alarm is ready for use.

Display and functions

Option

– 28 –
Display and functions
Electronic test
Perform regular functional tests on your smoke alarm by holding down the test /
stop button (for approx. 5 seconds). The warning tone will sound and the red 'ALARM'
LED light will flash. This does not signal that there is smoke in the room but it is
confirmation that the smoke alarm is functioning correctly.
By testing the device electronics, the mute function is automatically
activated for 9 minutes, during which time the LED will flash once every
10 seconds. After this 9-minute period, the detector will automatically
return to normal operating mode, in which the LED will again flash once
approximately every 6 minutes.
Always test the functioning of the smoke alarm after installation.
Additionally, a regular inspection is recommended. Ensure your hearing
is protected by maintaining an arm's length distance between yourself
and the device!
”
– 29 –
GB