Table des Matières
Publicité
q
w
K. Presser Foot (A or B)
Switch the lever on the presser foot to A or B. The lever
controls the spring action that occurs on the underside
of the foot.
The tip of the foot has markings that line up with the
insertion point of the needles - a great guide for
accurate sewing.
Example:
• Yellow A - 5 Thread: position A
• Blue B - 3 Thread Wide and Overlock 3:
position B.
NOTE:
Replace the presser foot with the Top Cover foot R
(blue transparent) when sewing Top Cover Stitch (see
page 56).
L. Needle Plate Setting Knob
(Chaining finger)
Your machine comes equipped with the rolled hem
plate. You can do all overlock stitches by engaging or
disengaging the chaining finger.
q Chaining finger
To Engage (up)
Pull the needle plate setting knob up.
w Needle plate setting knob
To Disengage (down)
Push the needle plate setting knob down.
30
Publicité
Table des Matières
