Janome 1200D PROFESSIONAL Manuel D'instructions page 49

Masquer les pouces Voir aussi pour 1200D PROFESSIONAL:
Table des Matières

Publicité

NARROW HEM 3
Select 6 and set up the machine.
Three threads form a balanced stitch that is a great
narrow edge finish.
Common Uses
Hemming on scarves, napkins and ruffles.
Garment construction on undergarments made of
lightweight knit fabrics.
Thread in the following sequence:
1 Red (F) thread path for upper looper (page 67)
2 Green (G) thread path for lower looper (page 68)
3 Yellow (B2) thread path for R1 needle (page 63)
ROLLED HEM 3
Select 7 and set up the machine.
Three threads form an unbalanced stitch. When the
stitch is formed, the fabric is rolled inside the stitch.
Common Uses
Hemming on light to medium weight fabrics.
Pintucks for decoration.
Thread in the following sequence:
1 Red (F) thread path for upper looper (page 67)
2 Green (G) thread path for lower looper (page 68)
3 Yellow (B2) thread path for R1 needle (page 63)
48

Publicité

Table des Matières
loading

Table des Matières