Table des Matières
Publicité
q
q
q
J.
Overlock Cover or Sewing Table
For program numbers 1-9, always attach the overlock
cover to the front cover.
To attach the overlock cover
The overlock cover protects the loopers.
To attach the overlock cover, open the front cover and
place the overlock cover on the outside of the front
cover. Insert the end of the overlock cover into the slot
of the front cover. Push the overlock cover firmly until
the tab snaps into place.
q Tab
For program number 10, always attach the sewing
table to the front cover.
To attach the sewing table
Detach the overlock cover by pulling the tab up and
toward you with your thumb finger.
NOTE:
The upper knife and chaining finger shall always be
disengaged when the sewing table is attached.
q Tab
To install the sewing table, place the sewing table on
the outside of the front cover. Insert the tabs into the
slot of the front cover. Push the sewing table firmly until
the tab snaps into place.
q Tab
28
Publicité
Table des Matières
