Removing Stitches From Fabric; Chainstitch - Turning Corners - Janome 1200D PROFESSIONAL Manuel D'instructions

Masquer les pouces Voir aussi pour 1200D PROFESSIONAL:
Table des Matières

Publicité

Removing Stitches from Fabric

Snip the needle thread(s) at intervals. Gently pull the
looper thread(s) and the stitch will unravel.
Chainstitch – Turning Corners
Sew last stitch before turning point by hand turning the
handwheel. Complete the stitch. Raise the needle
slightly out of the fabric. (The needle eye will be out
while the needle tip remains in fabric.) Raise presser
foot and gently turn fabric. Lower presser foot and
continue sewing.
96

Publicité

Table des Matières
loading

Table des Matières