Setting Up The Scart Video Output; Connecting A Component For Recording - Pioneer NS-DV1000 Mode D'emploi

13 Other Connections
Setting up the SCART video
output
(European model only)
The SCART video output can be switched to
composite or S-video independently for each
of the video inputs 1, 2 and 3. Set up so that
the SCART output reflects the type of input
you used for each video connection.
1 Press V1/V2/V3 VIDEO to select
'Video 1', 'Video 2' or 'Video 3', as
required.
The current input is shown in the display.
2 Press SYS MENU.
3 Use the
buttons to select 'SCART Video Output'.
4 Use the
buttons to select 'Video' or 'S-Video' as
required.
5 Press ENTER.
74
En
/ (cursor left/right)
/ (cursor up/down)
Connecting a component for
recording
The VIDEO 1 function has both inputs and
outputs for audio and video. Use these to
connect an audio or video recorder. For
playback, connect as described above in
Analog connections and Digital connections.
1 To record analog audio, connect the
AUDIO L / R jacks of VIDEO 1 OUT to the
analog audio inputs on the recorder.
• See Recording DVD-Audio using the REC
Mode on page 78 for how to record
DVD-Audio.
2 To record video, connect the VIDEO or
S-VIDEO jack of VIDEO 1 OUT to the
video or S-video input on the recorder.
3 To record digital audio, connect the
OPTICAL DIGITAL OUT jack to the optical
digital input on the recorder.
(illustration shows European model)