Using The On-Screen Displays - Pioneer NS-DV1000 Mode D'emploi

03 Getting started
3 Point the remote at your TV, hold
down the CLR button, then enter the
three digit code for your TV.
The remote transmits an on/off signal to the
TV. If you've entered the correct code, your TV
should switch off.
If your TV doesn't turn off, repeat the
procedure using the next code in the list
until your TV switches off successfully. Once
set, you can then use the individual TV
controls shown below.
(Illustration shows European model)
Button
P +/– (CH +/–) Changes the TV channel.
VOL +/–
INPUT

Using the on-screen displays

For ease of use, this player makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you'll need to use them when setting up the
player, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
24
En
TV CONTROL
P VOL
INPUT
What it does
Switches your TV on or into
standby.
Adjusts the volume.
Switches the TV's input
between the built in TV tuner
and an external video source.
All the screens are navigated in basically the
same way, using the cursor buttons to
change the highlighted item and pressing
ENTER to select it.
ENTER
Button What it does
DVD SETUP Displays/exits the on-screen
display
Changes the highlighted
menu item
ENTER
Selects the highlighted menu
item (both ENTER buttons
work in exactly the same way)
RETURN Returns to the main menu
without saving changes
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an
item on-screen, then press ENTER.
RETURN
SET UP
DVD