Switching On The Scart Audio Output; Using The Component Video Outputs; Listening To Tv Programs Through This System; Switching The Tv Audio Input From Scart To Rca - Pioneer NS-DV1000 Mode D'emploi

13 Other Connections

Switching on the SCART audio output

By default, the SCART audio output is Off
(since you would usually want to listen to the
soundtrack through this system, rather than
your TV). If you need to turn it on, you can.
1 Press TV.
2 Press SYS MENU.
3 Use the
buttons to select 'SCART Audio Output'.
4 Use the
buttons to select 'On' or 'Off'.
5 Press ENTER.
Using the component video
outputs
(US model only)
• Use a commercially available three-
way component video cable to connect
the COMPONENT OUT to a component
video input on your TV.
• The component video output can be set
to output progressive or interlace video.
See page 60 for more on this.
72
En
/ (cursor left/right)
(cursor up/down)
/
Listening to TV programs
through this system
This system has a pair of stereo audio inputs
so that you can listen to the audio from your
TV through the speakers of this system.
• Use a stereo audio cable with RCA pin
plugs to connect the TV INPUT to the
stereo audio output on your TV.
(illustration shows European model)
Switching the TV audio input
from SCART to RCA
(European model only)
You can set the TV audio input to RCA or
SCART.
1 Press TV.
2 Press SYS MENU.
3 Use the (cursor left/right)
/
buttons to select 'TV Audio'.
4 Use the (cursor up/down)
/
buttons to select 'SCART' or 'RCA'.
5 Press ENTER.