Adjusting The Effect Level; Adjusting The Sound - Pioneer NS-DV1000 Mode D'emploi

09

Adjusting the sound

• Advanced Music – Concert hall sound
• Advanced Movie – Movie theater
sound
• Virtual Surround Back – Simulated
surround back speaker sound from the
surround speakers
• Expanded – Extra wide sound stage
• TV Surround – Surround sound from
mono or stereo TV sound
• Virtual Surround – Simulated surround
sound from just the front left/right
speakers
• 5ch Stereo – 5.1 channel surround
sound from a stereo source
• When headphones are connected, only
the Phones Surround option is
available
• See also page 49–50 for more detailed
explanations of these modes
• You can't use the Advanced Surround
modes with SACD, DVD-Audio and
96 kHz PCM sources.
• If you change the surround setting, the
Advanced Surround setting is automati-
cally switched off.
52
En

Adjusting the effect level

You can adjust the effect level of the
Advanced Surround mode to get the sound
that you want.
• You can't adjust the effect level of the
5-Channel Stereo or the Virtual Sur-
round Back modes.
1 Press SOUND.
Make sure that one of the Advanced
Surround modes is on when you do this
(see Using Advanced Surround on the
previous page).
2 Use the (cursor left/right)
/
buttons to select 'Effect'.
3 Use the (cursor up/down)
/
buttons to adjust the effect level.
The effect level can be adjusted from 10
(min) to 90 (max).
4 Press ENTER to exit.