Berkel Red Line 220 Manuel D'instructions page 9

Troubleshooting
PROBLEM
The machine does not start when
the on button is pressed
The machine starts when the on
button is pressed but the operation
indicator light does not turn on
The machine does not stop when
the stop button is pressed
REASON
Lack of power or defective
control circuit
The indicator light may be
defective
The control circuit may be
defective
REMEDY
Check that the plug has been
correctly inserted. If the machine
still does not start, contact the
Service Center
Do not use the machine with the
indicator light off. Contact the
Service Center
Immediately stop the machine,
removing the plug from the mains
outlet. Contact the service center
9