Resume When Power On; Software Update; Factory Default Settings - Telestar imperial i110 Manuel D'utilisation

7 . OPERATION
7.1.15. Play/reproduction settings
Here you can set the play/reproduction settings applicable when playing
audio files via an external USB data medium.
7.1.16. DLNA setting
The radio is capable of communicating with DLNA-enabled equipment. For
E
example, it is possible to reproduce audio files on a DLNA-enabled cell phone
via the radio. Here you can change the name of the equipment used to indicate
the radio on a DLNA unit.
7.1.17. Equalizer
Here you can select certain pre-selected sound settings. Alternatively, you
can also press the EQ key on the remote control while the unit is in operation.

7.1.18. Resume when power on

Here you can activate the playback with the last selected radio station after
restarting the radio.

7.1.19. Software Update

It may be necessary to update the operating software in order to improve
the functions of the radio. The USB interface allows you to update the opera-
ting system of your radio, provided you have the requisite software, which is
available for downloading on www.telestar.de. The software provided on the
Internet page must be unpacked.
The unpacked files can then be saved on a suitable storage medium, and
connected to the radio via the USB connection (11).

7.1.20. Factory default settings

In this menu item you can reset the radio to the condition it was in when
supplied by the factory. The radio will then commence with a setup as per
initial operation.
Operating Manual 60