Energy Management; Sleep Timer - Telestar imperial i110 Manuel D'utilisation

7 . OPERATION
7.1.9. Display
Here you can change the multi-colour display to black and white, if required.

7.1.10. Energy management

Here you can determine whether resp. after what interval the radio should
switch automatically from the operating to stand-by mode. You can select
E
from 5, 15 and 30 minutes. If the radio does not switch off automatically, go
to the line Switch Off, and confirm the command with Enter.

7.1.11. Sleep timer

In this menu you can set the sleep timer. Select a time periode after which the
radio automatically turns off.
7.1.12. Buffer
You can set the buffer space in this menu.
7.1.13. Weather
If the radio is connected to the Internet, you can also show weather informati-
on on the radio display. This menu item allows you to select the place for which
weather information is to be shown. You can also specify the temperature
units.
Weather information is displayed in stand-by mode. The radio will alternate the
display automatically between weather data and the current time.
7.1.14. Setting for local stations
To facilitate the search for stations in your area while in Internet radio mode,
you can specifically search for radio stations in your region using the menu. To
do this, you must inform the radio of your location.
Here you can enter your location manually, or activate an automatic location
search.
59 IMPERIAL i110
®