Maintenance And Repairs; Stihl Limited Emission Control; Warranty Statement - Stihl FS 500 Notice D'emploi

– Thermoplastic blades, pack of 12;
for 3 and 4
– Transport guards for 5 to 14
Sharpening aids for metal cutting
attachments
– Flat sharpening files for 5, 7 to 11,
13, 14
– File holder with round file, for 12
– Saw set, for 12
– STIHL balancer for 5 to 14
– Sharpening templates (metal or
cardboard) for 7 to 9
Mounting hardware for metal cutting
attachments
– Thrust washer
– Rider plate for mowing and sawing
applications
– Guard ring for brush knife and
shredder blade
– Nut
Other Special Accessories
– Safety glasses
– Combination wrench
– Stop pin
– Carburetor screwdriver
– Full harness
– STIHL filler nozzle for fuels
– Special resin-free lubricating oil
Contact your STIHL dealer for more
information on these and other special
accessories.
FS 500, FS 550

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
STIHL Limited Emission
Control Warranty
Statement
This statement is given voluntarily,
based on the MOU (Memorandum of
Understanding) as agreed in April
1999 between Environmental Canada
and STIHL Limited
Your Warranty Rights and
Obligations
STIHL Limited is pleased to explain the
Emission Control System Warranty on
your equipment type engine. In Canada
new 1999 and later model year small off-
road equipment engines must be
designed, built and equipped, at the time
of sale, to meet the U.S. EPA
regulations for small non road engines.
The equipment engine must be free from
defects in materials and workmanship
which cause it to fail to conform with
U.S. EPA standards for the first two
years of engine use from the date of sale
to the ultimate purchaser.
STIHL Limited must warrant the
emission control system on your small
off-road engine for the period of time
listed below provided there has been no
abuse, neglect or improper maintenance
of your small off-road equipment engine.
Your emission control system includes
parts such as the carburetor and the
ignition system. Also included may be
hoses, and connectors and other
emission-related assemblies.
Where a warrantable condition exists,
STIHL Limited will repair your small off-
road equipment engine at no cost to you,
English
39