Specifications - Laerdal LCSU 4 Manuel D'utilisation

9 Specifications

Power Source Options
Battery
Power-cord
AC/DC Adapter Charger (Dry Location Use Only)
External Battery Charger (Dry Location Use Only)
Environmental Conditions
Operating and Storage Temperature
Operating and Storage Relative Humidity
Operating Atmospheric Pressure
Charging temperature
Short-term Storage & Transport Temperature
Humidity (Operating & Storage)
Storage & Transport Atmospheric Pressure:
The time required for the LCSU4 to warm from the minimum storage temperature between uses until it is ready for intended use
is minimum 50 minutes at room temperature.
The time required for the LCSU4 to cool from the maximum storage temperature between uses until it is ready for intended use
is minimum 60 minutes at room temperature.
Physical Characteristics
Dimensions
Weight
Canister Capacity
Performance
Expected service life
Air flow at Vacuum Inlet
(without canister attached)
High Efficiency Filter Kit
Material Chart
Cabinet front
Battery Cover
Vacuum Regulator
Bottom Cover
Vacuum Inlet Cover
Control Panel
800 ml Disposable Canister
Vacuum Tube
Vacuum Port Connector
Vacuum Inlet Connector
High Efficiency Filter
Filter housing
14
Rechargable, NiMH 12 volt 1.6 Ah
DC (12 V) Dry Location Use Only
Input: 100-240 V, 50-60 hz, 1.2 A
Input: 110-240 V, 50-60 hz, 250 mA Output: +18.5 V, 0.6 A
0 °C (32 °F) to + 40 °C (104 °F)
0 to 95% (non condensing)
9 psi (62 kPa) – 15.4 psi (106 kPa)
10 °C (50 °F) to + 40 °C (104 °F)
-40 °C (-40 °F) to + 70 °C (158 °F)
0 to 95% (non-condensing)
7.3 psi (50 kPa) – 15.4 psi (106 kPa)
880051/880052 (LCSU 4, 800 ml)
880061/880062 (LCSU 4, 300 ml)
880051/880052 (LCSU 4, 800 ml): 2 kg (4.4 lbs)
880061/880062 (LCSU 4, 300 ml): 1.6 kg (3.5 lbs)
300 ml
5 years
All configurations
Vacuum - Max.
Vacuum - Range
Vacuum Indicator accuracy
With the High Efficiency Filter Kit installed the unit is in accordance with
ISO 10079-1. The Kit reduces the Air flow and Battery run time. The filter is
HEPA rated with an efficiency of 99.97% down to a particle size of 0.3 μm.
PC
PC
PC
PC
PC
PVC
GPPS
Silicone, K-Resin
TPR
PC
PP
K-Resin
Output: +12 V, 3.4 A
23.6 cm x 19 cm x 23.6 cm (9.3" x
7.5" x 9.3")
18.5 cm x 26.2 cm x 8.1 cm (7.3" x
10.3" x 3.2")
800 ml
30 LPM (free flow) typical (May be less
when running from internal battery)
550+ mmHg
550+ mmHg
± 5% of full scale
Lid: HDPE Internal Filter: Aerostate