D: Wps Connection Setting - Pioneer XC-HM82-K Mode D'emploi

10
10
• Select Next.
82 *****
• Wait for the process to be completed.
• Select Done.
10
Wait until the Wi-Fi operation mark changes to
iPod/USB
Note
• If your iPhone, iPod touch, iPad and the router are
connected at 5 GHz then you will be unable to use this
setting method. Please try a different setting method.
• Images of the screen are taken from iOS7.1. If your iPod/
iPhone/iPad has software other than iOS7.1 installed,
control of the iPod/iPhone/iPad may differ.
Playback with NETWORK features

D: WPS connection setting

WPS is abbreviation of Wi-Fi Protected Setup. A standard
established by the Wi-Fi Alliance industry group for a function
allowing settings related to interconnection of WPS
compatible wireless LAN devices and encryption to be made
with simple operations.
This receiver supports push-button configuration and PIN
code configuration.
Network Type must be set to Wireless or Auto to use WPS
connection. When using WPS connection, be sure the LAN
cable is not connected to the receiver and turn this receiver
on.
Press NET SERVICE  SETUP on the remote control.
1
The Initial Setup screen is shown on the display.
.
Select Network Setting  WPS.
2
Use / to select PBC (Push Button Configuration) or
3
PIN Input, then press ENTER.
If your wireless device supports PBC, select PBC.
Select WPS Method
PBC (Push Button Configuration)
PIN Input
PBC (Push Button Configuration)
Connection settings are made automatically simply by
pressing the WPS buttons on the WPS compatible
wireless LAN device. Follow the instructions on the
display. This is the simplest way of making the settings,
and is possible when the WPS compatible wireless LAN
device is equipped with WPS button.
PIN INPUT
Connection settings are made by inputting the 8-digit PIN
code shown on the display to the access point to which
you selected.
39