Playing Your Ipod/Iphone/Ipad; Important - Pioneer XC-HM82-K Mode D'emploi

4
4
When using iPad
Make sure to place the iPad in a horizontal direction on the
stand.

Playing your iPod/iPhone/iPad

CAUTION
• When your iPod/iPhone/iPad is connected to this receiver
and you wish to operate the iPod/iPhone/iPad directly, be
sure to hold the iPod/iPhone/iPad steady with the other
hand to prevent malfunctions due to faulty contacts.
1
Connect your iPod/iPhone/iPad.
To connect your iPod/iPhone/iPad, see Connect iPod/
iPhone/iPad to the USB terminal on page 14.
2
Press iPod/USB to select iPod/USB as the input source.
iPod/USB is shown on the display and starts playback.
Note
• When the iPod/iPhone/iPad is connected to this receiver,
the playback information for the songs are displayed on the
iPod/iPhone/iPad display. Pressing iPod CONTROL
button on the remote will switch the display and display the
information on the front panel of the receiver.

Important

• If this receiver cannot play your iPod/iPhone/iPad, perform
the following troubleshooting checks:
- Check whether the iPod/iPhone/iPad is supported by this
receiver (page 14).
Reconnect the iPod/iPhone/iPad to the receiver. If this
-
doesn't seem to work, try resetting your iPod/iPhone/
iPad.
- Check the iPod/iPhone/iPad software is supported by this
receiver.
• If the iPod/iPhone/iPad cannot be operated, check the
following items:
- Is the iPod/iPhone/iPad connected correctly? Reconnect
the iPod/iPhone/iPad to the receiver.
Is the iPod/iPhone/iPad experiencing a hangup? Try
-
resetting the iPod/iPhone/iPad, and reconnect it to the
receiver.
- When connecting the iPad, use only an iPad dedicated
cable.
Tip
• iPod/iPhone/iPad recharging occurs whenever an iPod/
iPhone/iPad is connected to this receiver (This function is
only supported when the power is initially turned on or
during Network Standby).
• When input is switched from iPod/USB to another
function, iPod/iPhone/iPad playback is temporarily
stopped.
iPod/iPhone/iPad playback
15