Usb Playback; Playing Files Stored On Usb Storage Devices - Pioneer XC-HM82-K Mode D'emploi

7
7

USB playback

Playing files stored on USB storage devices

This receiver may not recognize a USB storage device, play
files or supply power to a USB storage device. For details, see
Connecting USB storage devices on page 10.
Pioneer does not guarantee that any file recorded on a USB
storage device will play or that power will be supplied to a USB
storage device. Also note that Pioneer will accept no
responsibility whatsoever for loss of files on USB storage
devices caused by connection to this receiver.
1
Press iPod/USB to select iPod/USB as the input source.
iPod/USB is shown on the display.
2
Connect the USB storage device.
The folders/files stored on the connected USB storage
device appear on the display automatically.
Use / to select the file, then press ENTER.
3
Playback starts.
• To return to the previous screen, press RETURN.
• When changing to a different input source, stop the
USB memory playback first, before changing.
• Turn the power off before removing the USB storage
device.
22
Note
• The following screen appears on the display when you play
back audio files. Note that some file types may not be
displayed.
• Display of album names and artist names supports the
following formats.
MP3, WMA, Apple Lossless, FLAC, AIFF(*), DSD.
*In the case of AIFF, files with a sampling frequency of 176
kHz or 192 kHz are not supported.
• Display of album art is supported for MP3 and DSD (DSF
only).
Embedded images are supported for JPEG only.
iPod/USB
Song 1
Artist
Album

mp3 256
kbps
1:05
• The progress bar and the remaining playback time may not
be displayed depending on the play back file.