Yamaha YZ250 2005 Manuel D'atelier Du Proprietaire page 192

FRONT FORK COMPRESSION DAMPING FORCE
ADJUSTMENT
Extent of adjustment:
Maximum
Fully turned in
position
9 STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
6 clicks out
*9 clicks out
*For EUROPE
cC
Do not force the adjuster past the minimum
or maximum extent of adjustment. The ad-
juster may be damaged.
w
Always adjust each front fork to the same
setting. Uneven adjustment can cause
poor handling and loss of stability.
EC36J001
FRONT FORK COMPRESSION DAMPING
FORCE ADJUSTMENT
1. Adjust:
9 Compression damping force
By turning the adjuster 1.
Stiffer a a ¡
Increase the compression
damping force. (Turn the
adjuster 1 1 in.)
Softer b b ¡
Decrease the compression
damping force. (Turn the
adjuster 1 1 out.)
3-28
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)