Table des Matières
Publicité
1 Master cylinder
2 Brake hose holder
3 Brake hose
CABLE ROUTING DIAGRAM
A Install the brake hose so that its pipe portion
directs as shown and lightly touches the projec-
tion on the caliper.
B Pass the brake hose into the brake hose holders.
C If the brake hose contacts the spring (rear shock
absorber), correct its twist.
D Install the brake hose so that its pipe portion
directs as shown and lightly touches the projection
on the master cylinder.
2-17
SPEC
Publicité
Table des Matières
