Burner Head And Cap Replacement - Dacor Modernist Pro Manuel D'utilisation

Burner head and cap replacement

Dual Burner head / caps
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 79
1. Orient the burner head so the electrode
opening aligns with the electrode itself.
2. Install the burner head so the electrode
passes through its opening in the head.
Verify that the burner head lies flat on
the cooktop.
3. Match the burner caps to the burners
by size, and then re-install the caps on
the burner heads.
CAUTION
Each cap fits on a specific burner head.
Verify that each cap is installed and lies
flat on the correct head.
NOTE
After installing the burners, verify that
they will work properly.
Improperly installed components will
result in poor ignition or uneven flames
as shown in the illustration at left. If
the burner shows uneven flame and
excessive yellow flame, shut off the burner
immediately and let the burner cool down.
Readjust the burner caps and try lighting
the burner again. A good flame shows all
blue and even flame around the burner.
English 79
2019-07-29 10:52:47