JVC KD-DB97BT Manuel D'instructions page 10

ANALOG RADIO
Other settings
1 Press and hold .
2 Turn the volume knob to select [TUNER], then press the knob.
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5
Press to exit.
To return to the previous setting item, press
RADIO TIMER ( 6)
SSM SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to
18 stations for FM. "SSM" stops flashing when the first 6 stations are stored.
Select SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.
IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
MONO ON: Improves the FM reception, but the stereo effect will be lost. ;
OFF: Cancels.
NEWS-STBY* ON: The unit will temporarily switch to News Programme if available. ;
OFF: Cancels.
8
REGIONAL*
AF SET*
TI SET*
.
PTY SEARCH*
Default: XX
PTY code: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION,
PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M
(music), DOCUMENT
* Only for FM source.
ON: Switches to another station only in the specific region using the "AF"
control. ; OFF: Cancels.
ON: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information if available
("TI" lights up). ; OFF: Cancels.
• [TI SET] in AM band is for enabling traffic interruption to DAB source
only.
Select a PTY code (see below).
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.