Use; Cleaning During The Working Day - Eurosystems P130 Traduction Du Manuel D'origine

• Check the operation of all safety devi-
ces and the presence and condition of all
protective covers.
• Check that the stand
is fully raised.
• Remove the blade guard (1) of
before use.
CARE!
If the check of the safety devices and
guards is negative, interrupt all the op-
erations.

5.5. USE

DANGER!
Always pay particular attention when
the PTO is engaged.
DANGER!
Always use the personal protection de-
vices required in the paragraph "Cloth-
ing".
DANGER!
Never leave the work operating posi-
tion behind the handlebars when the
machine is working. Never leave the
machine unguarded with the engine
running.
DANGER!
Do not adjust the handlebar when the
[1, fig. 06 and 6A]
[ fig. 05A]
machine is moving.
DANGER!
Be careful of the hot parts of the ma-
chine like for example the muffler and
the muffler protection.
DANGER!
If the machine and/or the accessories
should get clogged up, turn off the en-
gine and remove the ignition key and/or
the spark plug hood before intervening.
DANGER!
If the tool, the accessory or the ma-
chine gets damaged, immediately turn
off the engine.
For specific descriptions of the respecti-
ve commands refer to chapter "Use" and
"Operating commands" in the machine's
operation and maintenance manual.
5.6. CLEANING DURING THE WORKING
DAY
If it becomes necessary to clean the ma-
chine during the day (weeds, dirt, mud
etc.) turn off the engine and remove the
ignition key and/or the hood of the spark
plug to prevent inadvertent starting.
EN-11