TechniSat DIGITRADIO CD 2GO Mode D'emploi page 83

Symptom
The CD does not
play or skips during
playback.
Sound switches off
during CD playback.
If the malfunction has not been resolved, even after performing the
checks described, please contact the Technical Hotline.
Possible cause/remedy
The device is not in CD mode.
Faulty CD inserted.
The CD is incorrectly inserted.
Insert the CD with the labelled side facing
upwards.
The CD is dirty or faulty.
Clean the CD, use another CD.
Moisture has penetrated the CD
compartment.
Remove the CD and leave the CD compartment
open for approx. 1 hour to dry.
The CD playing time is more than 74 minutes.
The volume is set too high.
Decrease the volume.
The CD is damaged or dirty.
Clean the CD or replace it.
The device is being exposed to vibration.
Install the device in a location with low vibration
or enable the ASP function.
DE
EN
FR
NL
83