6.5 Scan setting
In this menu item it is possible to set the sensitivity of the scan.
>
Press the MENU button and use the UP or DOWN buttons to
select the [Search settings] item, then press the OK button.
>
Select whether the scan should only stop for stations with a
strong signal [Strong Stations Only] or for all stations (including
stations with a weak signal) [All Stations].
With the All Stations setting, the scan stops automatically upon
detecting each available station. This can result in weak stations
being played with background noise.
6.6 Audio settings
>
Hold down the MENU button and use the UP or DOWN buttons to
select the [Audio Settings] item.
>
Press the OK button.
>
Use UP or DOWN to select the [Stereo available] or [Mono only]
item to play back in stereo or only in mono sound when the FM
reception is weak.
>
Confirm by pressing the OK button.
DE
EN
FR
NL
73