Menu Operation - TechniSat DIGITRADIO CD 2GO Mode D'emploi

4.4.4 Menu operation

The menu allows you to access all the functions and settings of the
DIGITRADIO CD 2GO in DAB+ or FM mode. You can navigate through
the menu using the MENU (6), OK (11), UP (2) and DOWN (9) keys. The
menu is divided into submenus and, depending on the selected source
(DAB+ or FM), contains different menu items or functions which can be
enabled. To open the menu, simply press the MENU button briefly. To
switch to submenus, first press the UP or DOWN buttons to display a
submenu, then press the OK button to access the submenu. An asterisk
(*) highlights the current selection.
To close the menu: Press the MENU button several times
(depending on which submenu you are in) until the current radio
channel is displayed again.
Settings are not saved until the OK button is pressed. If the MENU
button is pressed instead, settings are not accepted or saved (the
MENU button in this case acts as a "Back" button and you exit the
menu).
The functions and buttons to be pressed are shown in bold in this
instruction manual. Displays in [square brackets].
Some text (e.g. menu items, station information) may be too long
to show on the display. These will be then shown as running text
shortly thereafter.
66