Language; Factory Settings - TechniSat DIGITRADIO CD 2GO Mode D'emploi

8.1 Language

> Press the MENU button and use the UP or DOWN buttons to
select the [System] item, then press the OK button.
> Use the UP or DOWN buttons to select the [Language] item and
press OK.
> Using the UP or DOWN buttons, select one of the available
languages and confirm by pressing the OK button.

8.2 Factory settings

If you change the location of the device, e.g. when moving house, it is
possible that the saved stations can no longer be received. In this case
you can reset the device to factory settings to delete all the saved
stations and launch a new scan.
> Press the MENU button and use the UP or DOWN buttons to
select the [System] item, then press the OK button.
> Use the UP or DOWN buttons to select the [Factory Settings]
item and press OK.
> Using the UP or DOWN buttons, select the [Yes] item to reset to
the factory setting and press the OK button.
All previously stored stations and settings will now be deleted. The
device is now in the same status as when delivered.
80