Robert Juliat 1011+ Dossier Technique page 49

robert
juliat
3.3. The off command is given, but the lamp
stays on.
Green &
red LED :
off
Green &
red LED
on.
4 . NON-FUNCTIONING DIAGNOSIS FOR THE SHUTTER :
1.1 The shutter command is given, but no
action.
1.2 . The shutter only excepts an up command,
does not except an down command.
1.3 . The shutter reacts badly, and the motor
runs continuous.
1.4. The shutter act in a saw-tooth movement
on a fluent command.
1.5. Shutter action is delayed to command.
31
robert juliat
TECHNICAL FILE
HMI 1200 FOLLOWSPOT
message unchanged.
message unchanged.
New shutter level
not displayed.
New shutter level
displayed.
The shutter does
not react or reacts
badly.
The shutter level is
correctly displayed.
Transmission Data error :
connection failure : check the wiring.
( refer to Tech. File page 12 )
connection damaged or :
( refer to Tech. File page 12 )
Command link error :
Digital - refer to 3.1.
Analog - refer to 2.
Shutter cable demaged :
Check cable.
Faulty power supply :
Change CAD :
( Refer to Tech. File page 27 )
Motor demaged : Change the
whole shutter unit.
( refer to Tech. File page 21 )
Error on the Shutter unit :
Change the whole shutter unit.
( refer to Tech. File page 21 )
1011
1011
1011
A DATER DU:
VALID SINCE:
Resend the
"LAMP OFF"
command.
Resend the
"LAMP OFF"
command.
resend the resend the
level level
command. command.
resend the
level
command.
resend the
level
command.
resend the
level
command.
ROUTE DE BEAUMONT F 60530 FRESNOY - EN - THELLE
TEL.: 33 (0)3.44.26.51.89 FAX : 33 (0)3.44.26.90.79
+
+
B
+
B
08.12.97