Rear Panel Connections - Lexicon JAMMAN Mode D'emploi

MIDI
Two 5-pin DIN MIDI connec-
tors are provided for MIDI IN
and MIDI OUT.
MIDI
FOOTSWITCHES
TAP SELECT
OUT IN
RESET/BYP FUNCTION
COMMON COMMON
FOOTSWITCHES
Two connectors, for momentary contact
footswitches, allow footswitch control of
front panel functions.
English
POWER
Use Lexicon MSA power pack,
or 9VAC 1 amp equivalent.
THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
:TIP INTERFERENCE RECEIVED<
INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
:RING
:SLEEVE
Tip Sleeve
TIP
RING
SLEEVE
Ring

Rear Panel Connections

OUPUT
Single-ended (unbalanced) stereo outputs provide +4dBu
nominal output level. Use the right output connector for mono
output. If no connection is made at the right output, the left
output can be used to drive headphones at modest volume.
POWER OUTPUTS
J M
AM AN
LEXICON, INC.
WALTHAM MA 02154
MADE IN U.S.A.
P/N 021-09504
9V~, 1A,
L
50-60Hz
(PHONES) (MONO)
SERIAL #
USE LEXICON
MSA AC ADAPTER
INPUT
TAP
Single-ended (unbalanced) inputs accept
levels as low as -30dBu. Input impedance is
50 kΩ in stereo, 25 kΩ in mono. Either can be
RESET/BYPASS
used for mono input.
4
INPUTS
R L R
(MONO)