Midi Implementation Notes - Lexicon JAMMAN Mode D'emploi

MIDI Implementation Notes

All front panel controls can be accessed
via MIDI Program Change messages as
shown. These messages are recognized on
MIDI Channel 1.
Recognition of these messages can be
temporarily disabled, or assigned to another
MIDI Channel with the following power-up
procedure:
1. Simultaneously press RESET/BYPASS,
and FUNCTION, while applying power to
the unit. A "d" should appear on the
display.
2. Press RESET/BYPASS, then turn the
Mode knob until "15" is displayed.
3. Press RESET/BYPASS. The display will
show "1", and the edit indicator will ap-
pear. Turn SELECT to assign 0 (off) or
MIDI Channel 1-16.
4. Press RESET/BYPASS, then turn the
Mode knob until "9" is displayed. Press
RESET/BYPASS again to resume nor-
mal operation with the new assignment.
English
MIDI Program Change Map
Pgm Chg # Loop mode
1 tap
2 reset (punch-in)
3 reset (phrased)
4 replace (punch-in)
5 replace (phrased)
6 layer
7 mute (punch-in)
8 mute (phrased)
9 fade short
10 fade medium
11 fade long
12 cue loop 1
13 cue loop 2
14 cue loop 3
15 cue loop 4
16 cue loop 5
17 cue loop 6
18 cue loop 7
19 cue loop 8
20 mute/restart
26
Sample mode Echo mode
tap tap
reset bypass
reset bypass
forward/reverse divide by 2
forward/reverse divide by 2
forward/reverse divide by 3
forward/reverse divide by 4
forward/reverse divide by 4
audio threshold 1 feedback 1
audio threshold 3 feedback 3
audio threshold 5 feedback 5
audio threshold 7 feedback 7
audio threshold 9 feedback 9
audio threshold 11 feedback 11
audio threshold 13 feedback 13
audio threshold 15 feedback 15
- feedback 16
- -
- -
- -