Basic Sampling - Lexicon JAMMAN Mode D'emploi

Basic Sampling

LEDs are Inactive in this mode.
RESET/BYPASS
Resets the unit to sample record
ready. Does not affect audio
threshold or +/- settings.
DISPLAY
+ = Sample selected to play forward; flashing = ready to record
- = Sample selected to play backwards
1-16 = Audio trigger threshold
• = Indicates audio sample is stored
Single segment chase pattern indicates sample record; dual segment
chase patterns indicate forward and backward sample play.
English
FUNCTION
Toggles "+" and "-", selecting whether
the recorded sample is to play forward
or backward.
RESET/BYPASS FUNCTION
MUTE/
LAYER/
REPLACE/
SELECT
Selects audio threshold which triggers start of
sample record or play. ( 1 = manual trigger via
TAP, 2-16 correspond to increased sensitivity
— lower audio levels required for trigger.)
12
LED lights during sample record, flashes
on start of sample play.
TAP
If no audio trigger is specified via
SELECT, first push starts record-
ing; second push stops recording. If
an audio trigger has started record-
TEMPO
SELECT
TAP
ing, first push will stop recording.
Once a sample is recorded, subse-
quent pushes restart sample play.
If an audio trigger is set to 2-16,
pressing TAP overrides the audio
trigger to start recording.