GOK GWS 904 Instructions De Montage Et De D'utilisation page 44

I hereby confirm that the
following safety device(s)
was/were installed
correctly:
In accordance with the applicable assembly and operating manual(s). Upon completion of
the ASSEMBLY, the safety devices were put into service and subjected to a CONTROL.
At the time of startup, the safety device(s) worked immaculately.
The safety device(s) was/were installed into a tank / battery tank:
Tank manufacturer
Fabricate no.
Certificate of suitability for intended use issued by
building inspectorate
Tank pursuant to DIN / EN / ...
Rated volume per tank in litres
Number of tanks for battery tank
Maximum admissible level
GWG probe length
GWG adjusting dimension
GWG control dimension
In the event of GWG replacement: a limit indicator with
certificate of suitability for intended use issued by the
building inspectorate was removed
In the event of GWG replacement: a limit indicator with
adjusting dimension
was removed
®
F-Stop GWG FSS probe length
®
F-Stop GWG FSS adjusting dimension
®
F-Stop GWG FSS control dimension
®
F-Stop GWG-DEV: rated response over-pressure
**)
controller
Address of operator
Place, date
*) Enter values of F-Stop
24 / 24
Installation certificate from specialised company
• To be kept by system operator.
• Important for any warranty claims.
 Type GWD limit indicator
 Type GWS limit indicator
®
GWG FSS
Regler- und Armaturen-Gesellschaft mbH & Co. KG
Obernbreiter Straße 2-16 • 97340 Marktbreit / Germany
Tel.: +49 9332 404-0 • Fax: +49 9332 404-43
E-Mail: info@gok-online.de • Internet: www.gok-online.de
Limit indicator GWG - type GWS -issue 2
►
►
►
►
►
►
►
Z = ►
X = ►
Y = ►
►
X = ►
*)
Z = ►
FSS
*)
X = ►
FSS
*)
Y = ►
FSS
= ►
Address of specialised company
Specialised company (stamp, signature)
**) Enter values of F-Stop
®
 F-Stop GWG-FSS
®
 F-Stop GWG-DEV
 ...........................
®
GWG-DEV
Part No. 15 382 65
*)
**)
l
% (V/V)
mm
mm
mm
mm
mm
mm
mm
mbar