Connecting To Computer Devices - JVC DLA-M2000LU Manuel D'instructions

(QJB'/$0ERRN 3DJH  7KXUVGD\ $XJXVW     $0
Connecting to Various Devices

Connecting to Computer Devices

Before connection, be sure to turn off both the projector and computer devices.
• Read thoroughly the manual that comes with each device.
I Connection to an IBM PC or IBM-compatible computer
• Use the supplied personal computer connection cable. Also, prepare cables required for connecting the devices
connected.
• Desktop type
• Notebook type
*There are some notebook types which
do not allow the computer's LCD to work if
an external display is connected. With
such a notebook computer, the LCD
display and external display output need
to be switched.
• Desktop type
• RGB output devices
Laser video disc
player, etc.
Notes
• When connecting an audio output terminal such as a computer sound source to the projector, connect to the PC AUDIO
terminal using the separately available audio cable.
• When the PC2 input terminal is used, "PC2 (BNC)" must be selected from the menu options. Refer to "Setting and Adjusting
Other Functions (OPTIONS)" on page 52.
28
Personal Computer
To monitor
connection cable (supplied)
connector
To PC 1
To PC 2
To PC 2
Separate cable
(separately
available)
To monitor connector
To R
To G
To B
To H/Cs
To V
DLA-M2000LU/M2000SCU/ LCT0940-002A / ENGLISH
To PC 1
Y/C
To R
R
P /R-Y
R
To G
G
PC AUDIO
H
Y
To B
B
V
P /B-Y
B
RS-232C
To PC OUT
Cable supplied with
the display (or
separately available)
(D-sub 3-row 15-pin)
POWER
Display monitor
* When a display monitor is connected to
the PC OUT terminal, you can view the
video from the computer on the monitor.
VIDEO
To PC 2
AUDIO
To H/Cs
To V
REMOTE