Power Control Station - LEGRAND MP6 Mode D'emploi

14. Power Control Station

Power Control Station is a software application for personal computers equipped with
Microsoft Windows
unit of the power breaker through the appropriate USB port.
1800A
In
120
100
50
0
07/10/2009
10.25
The software supports connection to the
power breaker in order to:
• Monitor the status of the automatic
breaker;
• Read information (firmware versions,
device version, alarms, measurements,
parameters, fault history);
• View the trip curve characteristics set
by the user;
• Update the firmware of the protection
unit (for Service personnel);
• Generate reports based on the data
stored and read by the protection unit;
• Command diagnostic tests.
96
operating system that allows to exchange data with the protection
®
T
1200A 1500A 1500A
Thanks to the possibility to save the protec-
tion parameters, the configuration and the
faults history of the protection unit, it also
facilitates the operation of an electrical
panel board test before commissioning.
Power Control Station is free software
and is available on the manufacturer's
website.