Accessories; Communication Option - LEGRAND MP6 Mode D'emploi

12. Accessories

0 288 10 - 0 288 11 (factory assembled)
External current trasformer for earth fault and neutral protection
(not disconnected).
It's possible to use it with 3 poles breakers and is installed on the neutral, in order to
guarantee the following protections without disconnecting it in case of breaker trip:
- neutral protection
- earth fault protection (only for version 0 288 02 and 0 288 04)
The device 0 288 10 can works with nominal currents up to 4000A (is not available
on DMX automatic breakers DMX 2500 42kA), while the device 0 288 11 can works
3 3
only on automatic breakers DMX 6300 up to 6300A.
3
0 288 06
External power supply module.
The accesory allows an uninterrupted supply of electronic protection unit, even if the
circuit breaker is switched off/tripped.
The accessory allows to power 1 protection unit MP6 or up to 4 protection units MP4.
0 288 12
Module adjustable contacts
This module is an accessory used to manage other external devices for signal/control.
Must be related to the protection unit, which allow its adjustment, and must be connec-
ted to the terminals on the upper part of the breaker.
0 288 05 (factory assembled)

Communication option

Factory assembled this option allows to connect the breaker to a MODBUS RS485
supervision system.
92