By pushing the "settings"
menu:
"Alarms
setting"
"Display
setting"
"Communication
setting"
"Alarms setting" button allows to enable and set the alarms.
The "Measure setting" button allows to adjust the measure criteria.
The "display setting" button allows to adjust the touchscreen.
The "date and time" button allows to adjust date and time.
"Communication setting" button allows to set the communication parameters.
(If present communication option 0 288 05).
The "Programmable outputs setting" button allows to adjust local contact W in terminal
block and the contacts associated with the optional device 0 288 12.
70
button in the main menu it's possible to enter the following
8. Configuration menu
"Measure setting"
"Date and
time setting"
"Programmable
outputs setting"