Main Menu - LEGRAND MP6 Mode D'emploi

By pushing the button
menu where there are 6 buttons for the sub menus and the back arrow to go back to
the main menu.
"Protection "
"Settings"
"Information"
"Protection" button allows to adjust timing and tripping currents.
"Measure" button allows to read the values of parameters measured.
"Settings" button allows to enter the general setting of the protection unit (time, date, etc...).
"Archives" allows to enter the archives of trips and alarms.
"Information" button allows to check technical information of breaker and protection.
"Battery" button allows to verify the battery status.
60
on the home page bottom right, it's possible to enter the main

5. Main menu

"Measures"
"Archive"
"Battery"