Yoo Digital Home i.wip 2000 Notice D'utilisation page 48

ChECKPoINtS BEfoRE REQUESt foR AftER-SALES SERVICE
Error details
Q. the robot does not work.
Q. the robot cannot be charged.
Q. the robot cannot be operated with
the remote controller.
Q. the remote controller does not
work.
Q. the sucking power is weak.
Q. the robot cannot be turned on.
Q. the brush does not rotate.
Q. the noise gets stronger than be-
fore.
Q. the robot works abnormally during
cleaning.
Q. Reserved cleaning cannot be
made.
Q. the robot does not work with any
button.
48 USER'S MANUAL I.WIP 2000
Checkpoints and actions to be taken
(1) turn on the power switch at the right bottom of the
rear part.
(2) Check if the battery is discharged.
-> Charge the robot with the charger.
(1) Clear away obstacles from the charger.
(2) Check if the charger is turned on.
(3) turn on the power switch at the right bottom of the
rear part.
-> If you force the robot to be charged, it may not work.
(1) try matching with the remote controller.
(2) Change the battery of the remote controller.
(1) Change the battery.
(1) Empty the dust box.
(2) Clean the filter of the dust box.
(3) Check if there are foreign substances in the intake.
(1) turn on the power switch at the right bottom of the
rear part.
(2) Check if the battery is discharged.
(1) Check if there are any foreign substances around the
brush.
(2) Check if the brush is properly inserted.
(1) Check if the filter of the dust box is properly inserted.
(2) Check if there are any foreign substances around the
brush.
(1) Check if the dustcloth is inserted (if exists) and then if
it is appropriately inserted.
(2) turn on the power switch at the right bottom of the
rear part.
(3) Clean the sensor and the adjacent part with a soft
cloth.
(1) Check if current time is properly set.
(2) Check if a reservation setup has been made.
If the main body is directly connected with the adapter
for charging, no button input will work.
__________________________________________________________
__