Yoo Digital Home i.wip 2000 Notice D'utilisation page 43

__________________________________________________________ USER'S MANUAL I.WIP 2000 43
03. hold the fixing pin of the rubber brush and
lift it to remove it.
04. Clean the removed brush with the brush.
05. Insert back the rubber brush.
• Check the groove shape and insert it into
the fixing hole of the rubber brush. then, fix the
wing of the fixing pin to the fixing pin.
06. Insert the cover of the dust intake.
• Insert the protruding part of the cover before
others. then, it will be fixed due to the magne-
tic power.
EN