Yoo Digital Home i.wip 2000 Notice D'utilisation page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

I N S tA L L I N g P Ro D U C t _______________________
2.
Connect the charger adapter with the charger.
once the power is connected, the blue lamp is turned on at the front.
for appropriate charging of the product, the charger adapter should be connected with the
power in any case.
3.
Arrange the position of the charger.
the charger should be distant at least 1m away from the front and side parts.
the wall facing the rear of the charger should not be made of glass or glossy materials.
Insert the adapter into the compartment of the charger, properly.
If you put it in a site under direct sunlight, automatic charging may not be made or the pro-
duct can be discolored/decolorized.
__________________________________________________________
1.
Plug the adapter power cord in the adapter
and connect with the power.
USER'S MANUAL I.WIP 2000 17
EN

Publicité

Table des Matières
loading

Table des Matières