________________________________________________
7.
Insert the battery of the remote controller and the indicator.
•
you need to insert the battery in a correct position following the polarity data indicated in
the insertion position.
Important
8.
Install the indicator in a desired position.
•
the product can perform cleaning, anyway, with no indicator installed.
•
for detailed installation methods, see the page 36.
Important
__________________________________________________________
the indicator battery (D2 specifications) is not supplied with the product.
the indicator can be used in connection with an additional adaptor (5V).
(In this connection, the battery power will not be consumed.)
USER'S MANUAL I.WIP 2000 19
EN