I N S tA L L I N g P Ro D U C t _______________________
4.
Install the dustcloth guard into the robot cleaner.
•
If you do not want the dustcloth function, go to the next procedure.
5.
turn on the power switch of the robot cleaner (at the left of the rear dust box).
•
When you lift it to the [•] position, the product gets turned on.
•
Without the power switch turned on, no charging will be made.
6.
Put the robot cleaner in the charger with your both hands and activate manual
•
Locate the robot cleaner and the charging terminal of the charger, face to face.
•
the charging time can be around one (1) hour depending on the remaining battery capacity.
•
After 1-hour charging, you can use the product for around one (1) hour.
•
Usage time may vary depending on the strength of the sucking power.
18 USER'S MANUAL I.WIP 2000
Battery lamp
Being charged
Charging completed
__________________________________________________________
Blinks 1 time/sec
the battery is
completely charged.
Low battery
Blinks 4 times/sec